Stenflex rubber expansion joint type C-31

Product information

Stenflex rubber expansion joint type C-31 is a rubber expansion joint with full rubber flanges and tension rods, available in large diameters. Various flange drillings are possible in this set-up. Thanks to the tension rods, the pressure reaction force is absorbed in a system. The tension rods are only limited on the outside as a standard, so that the expansion joint cannot extend.

Stenflex rubber compensator type C-31 is available in three different pressure ratings, whereas the overall length can be customised. Optionally, the tension rods can be limited on the outside, as well as on the inside. This way, the expansion joint cannot extend and cannot be pressed in (e.g. in a vacuum).

Stenflex C-31

Specifications

  • Rubber grade: EPDM, NBR or CIIR rubber
  • Range: DN 300 to DN 3600
  • Temperature: max. 100°C
  • Pressure rating: PN 4, PN 10 or PN 16

Application

Type C-31 is for universal use and well suited for absorbing vibrations from pumps, absorbing subsidence or lateral pipe displacements.

Product request

Request your product by completing the form. Do you have any questions about Stenflex rubber expansion joint type C-31? Feel free to write these down on the form as well. Our specialists will contact you directly to discuss your needs. 

Need advice on what applies in your situation? Contact us.