Core Type BBH

Product information

Core PTFE slide bearing type BBH is a square or rectangular PTFE slide bearing for larger loads. The bearing is fitted with flanges and must therefore be fixed to the load-bearing construction by means of bolts.

The PTFE bearing type BBH is supplied with a matching counter bearing and bolt holes as a standard. The BBH type can absorb displacements in two directions. The standard motion absorbing capacity is approximately 20 mm, 40 mm or 80 mm. This bearing is also available with a guide. This is type BBH-G. The BBH-G type is single-side guided and can therefore only absorb displacement in one direction.



The BBH type is a flat bearing that does not allow the superstructure to tilt or bend. Special dimensions and base materials are possible. However, the standard version is the most economical.

Product request

Request your product by completing the form. Do you have any questions about Core Type BBH? Feel free to write these down on the form as well. Our specialists will contact you directly to discuss your needs. 

Need advice on what applies in your situation? Contact us.