Core Type WBI

Product information

Core PTFE slide bearing type WBI is a square PTFE slide bearing for higher temperatures. The PTFE element of a PTFE slide bearing may be loaded at a maximum of 150°C. The PTFE bearing type WBI is supplied with an insulated counter bearing. The temperature of the superstructure may therefore exceed 150°C.

The PTFE bearing type WBI can be supplied with a counter bearing suitable for temperatures of 300°C or 600°C. The PTFE bearing type WBI can absorb displacements in two directions. The standard motion absorbing capacity is approximately 25 mm or 50 mm. The standard lower bearing is a weldable type WB bearing. However, the lower bearing can also be finished as a weldable type RB (round bearing) or type BB or RB with flanges.

doorsnede WBI

Dimension

The WBC type is a flat bearing that does not allow the superstructure to tilt or bend. Special dimensions and base materials are possible. However, the standard version is the most economical.

Product request

Request your product by completing the form. Do you have any questions about Core Type WBI? Feel free to write these down on the form as well. Our specialists will contact you directly to discuss your needs. 

Need advice on what applies in your situation? Contact us.