Lisega connectors welded and clamped
Lisega connecting parts are intended to suspend a suspended support system from the load-bearing steel structure. Lisega connection parts are of the same load group as all other Lisega parts, such as spring hangers and constant hangers. This guarantees the strength of the entire suspended support system.
Weld-on clevis type 73
Can be used at the top of a suspended pipe support. The clevis can be welded to the steelwork. The suspended support is then suspended by means of an eye nut.
Weld-on eye plate type 75
Can be used at the top of a suspended pipe support. The eye plate can be welded to the steelwork. The suspended support is then suspended by means of a threaded clevis.
Welding plate type 74
Can be used at the top of a suspended pipe support. The welding plate can be welded on top of the steelwork and has a cone with a hardened convex ring. The threaded rod of the suspended support runs through the ring. Thanks to the cone and the convex ring, the threaded rod can swing slightly.
Beam clamp type 78
Clamping system for H-shaped beams with profile widths of 46 to 300 mm. The clamping system is suitable for HEA/HEB/HEM, INP and IPE beams, among other beams.
Trapezes type 79
Various types of trapezes for the off-centre suspending of a pipe support, combining two pipe supports etc.
Beam adapter type 76
The Lisega beam clamps or beam adapters can clamp various steel parts together. The Lisega beam clamps have a large clamping range (M10: from 3 to 15 mm, M20: from 6 to 25 mm).
Request your product by completing the form. Do you have any questions about Lisega connectors welded and clamped? Feel free to write these down on the form as well. Our specialists will contact you directly to discuss your needs.